Fraud Blocker

Ceiling Fan & Lighting Installation in Las Vegas

A ceiling fan box is not the same as a light fixture box. That one sentence is the difference between a fan that hums quietly for fifteen years and one that wobbles itself loose over your bed.

Quick Answer

A-Team Electricians installs ceiling fans, indoor and outdoor lighting, and recessed lighting across the Las Vegas valley — including fan installs where no fixture existed before, which means new wiring, a fan-rated box, and a switch. Licensed, insured, upfront pricing, and every install anchored and wired to code.

Key facts

  • Fans need fan-rated boxes. A standard light box isn't built for 40 pounds of spinning motor. Most wobble complaints start here.
  • Swapping a fixture is simple. Adding one isn't. New locations mean running cable, cutting in a box, and a permit when new circuits are involved.
  • Vaulted ceilings, high entries, and outdoor patios are exactly where DIY goes wrong — and where we do our steadiest business.
  • Recessed lighting done right accounts for insulation contact ratings and the panel's available capacity, not just hole placement.
  • In a Vegas summer, a good fan is not décor. It's the difference between 78° feeling fine and feeling stuffy.

What we install

  • Ceiling fans — replacements, new locations with no existing fixture, smart fans, and heavy or oversized fans that need serious anchoring.
  • Indoor lighting — recessed cans, pendants, chandeliers (including two-story entries), under-cabinet, closet and pantry lighting.
  • Outdoor lighting — patio fans and lights, security and motion lighting, landscape lighting on proper exterior-rated circuits.
  • Dimmers and smart switches — matched to the load, which is where mismatched flicker problems usually come from.
  • New switches and circuits — a light where there's never been one, wired through the attic or wall, patched cleanly.

Anyone can hang a fan on existing wires. The trade is in the box, the blocking, and the switch loop behind the drywall.

The fan-box problem, explained

Ceiling fans put a rotating, vibrating load on their mount. Code requires a fan-rated box — one designed and listed for that stress — fastened to structure, not just to drywall. Builder-grade homes here often have plastic light boxes in bedroom ceilings; hang a fan on one and it loosens a little with every hour of runtime. If your fan wobbles, clicks, or has drifted away from the ceiling, that's the usual story. The fix is a proper box and brace, and it's quick for us to do.

Adding a fan or light where nothing exists

This is the job people assume is impossible without tearing the ceiling open. Usually it isn't. We run cable from an existing circuit or the panel, cut in a fan-rated box, mount a switch where you actually want it, and leave paint-ready patches. Attic access makes it easier; no attic access makes it a little more surgical, not impossible. Where the work adds a new circuit, a permit applies — our permit guide explains when, and we handle it either way.

What drives the price

  • Replacement vs. new location — the wiring run is the job; the fixture swap is the easy part.
  • Ceiling height — a 10-foot bedroom vs. an 18-foot entry chandelier are different days.
  • Attic access above the room, or fishing cable blind.
  • The fixture itself — a 70-inch fan or a heavy chandelier needs added blocking.
  • How many at once — batching several rooms in one visit is meaningfully cheaper per fixture.

Every job is quoted upfront in writing before we start.

Why homeowners call A-Team

  • Licensed and insured Nevada contractor — NSCB #93397.
  • Fan-rated boxes and structural anchoring on every fan, every time.
  • Clean cable runs and paint-ready patches — we don't leave drywall homework.
  • Honest recommendations — if your existing box is fine, we say so and just hang the fan.
  • Upfront pricing, no surprises on the invoice.

Areas we serve

Fan and lighting installation across the Las Vegas valley: Las Vegas, North Las Vegas, Henderson, Summerlin, Spring Valley, Enterprise, Paradise, Boulder City, and surrounding communities. Full service area here.

Frequently asked questions

Do I need an electrician to install a ceiling fan?

For a like-for-like swap on a fan-rated box, a handy homeowner can manage. For anything else — no existing fixture, an unknown or plastic box, tall ceilings, outdoor locations, or new switches — a licensed electrician is the right call. The failure mode isn't inconvenience; it's a 40-pound machine over a bed.

Can you install a fan where there's only a light — or nothing at all?

Yes. Light-to-fan conversions get a fan-rated box and often a new switch loop for separate fan/light control. Blank-ceiling installs add the wiring run. Both are everyday work for us.

Why does my ceiling fan wobble?

Nine times out of ten: the box. A standard fixture box wasn't made for rotating load and works itself loose. Occasionally it's blade balance — we check both, fix the real cause, and re-secure the mount to structure.

Can you hang a chandelier in a two-story entry?

Yes — high-ceiling work is a scheduling detail for us, not a special project. Heavy fixtures also get their anchoring checked and upgraded as part of the install.

Is recessed lighting worth it in an older home?

Usually, and modern LED cans make it easier: less heat, lower load, slim housings for tight joist bays. The parts that matter are insulation-contact ratings, circuit capacity, and layout — which is design work, and we help with it.

Do you install outdoor and patio fans?

Yes — on damp/wet-rated fixtures and exterior-rated circuits with proper GFCI protection. A Vegas patio without a fan is unusable four months a year; this fix is cheaper than most people expect.

Get the fan up before the next heat wave

Upfront pricing, fan-rated mounting, and clean finishes — from a licensed crew.

Call (702) 625-9814 Request a Free Estimate

Licensed & insured · NSCB #93397 · Bonded to $500,000 · Serving the Las Vegas valley

Safety note: This page is general information about fan and lighting installation, not a substitute for an on-site evaluation. If an existing fixture sparks, buzzes, or smells hot, switch off its breaker and call a licensed electrician.